Canon imagePROGRAF iPF830 Operation Guide - Page 21

Handling Paper Handling sheets iPF830 Series Loading Sheets in the Printer Handling sheets Loading Sheets in the Printer ...21 Removing Sheets ...23 Loading Sheets in the Printer Follow these steps to load sheets in the printer. • Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it. Important • Load the paper straight. Loading paper askew will cause an error. (See "Paper loaded askew..") ➔P.127 • Before loading sheets, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these Note areas are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.") ➔P.47 • Store unused paper in the original package, away from high temperature, humidity, and direct sunlight. 1 Select sheets as the paper source. • If a print job was received Sheets are automatically selected, and the media type and size specified by the print job are shown on the Display Screen. Press ▲ or ▼ to select Load Paper, and then press the OK button. • If no print job was received 1. Press the Load button. 2. Press ▲ or ▼ to select Cut Sheet, and then press the OK button. • If any paper has been advanced that will not be used, a message is shown requesting you to remove it. Note Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step. 2 Lift the Release Lever and open the Top Cover. 21 Basic Guide