Canon imagePROGRAF iPF830 Operation Guide - Page 75
Reinstalling the Printer, Assemble the stand
View all Canon imagePROGRAF iPF830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
iPF830 Series Reinstalling the Printer Reinstalling the Printer The basic workflow for reinstalling the printer is as follows. For detailed instructions, see the Setup Guide. Assemble the stand 1 Referring to the Printer Stand Setup Guide, assemble the Stand. • The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself Caution poses a risk of injury or bending the Stand. • When assembling the Stand, lock the casters. In addition, always unlock the casters before moving the assembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or damage to the location site. Install the printer 1 Mount the printer on the assembled Stand and tighten the screws firmly. Printer Relocation Preparing to Transfer the Printer • Moving the printer requires at least six people, holding it on both sides. Be careful to avoid back strain Caution and other injuries. • When moving the printer, firmly grasp the Carry- ing Handles (a) under each side. The printer may be unsteady if you hold it at other positions, which poses a risk of injury from dropping the printer. a 75 Basic Guide