Canon imagePROGRAF iPF830 Operation Guide - Page 89
Adjustments for Better Print Quality, Adjusting the Printhead
View all Canon imagePROGRAF iPF830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
iPF830 Series Automatic Adjustment to Straighten Lines and Colors Adjustments for Better Print Quality Adjusting the Printhead Automatic Adjustment to Straighten Lines and Colors If vertical lines in printed documents are warped or colors are out of alignment, execute Head Posi. Adj.. The printer will print and read a test pattern, and the Printhead position will be adjusted automatically. There are two modes for automatic Printhead adjustment: Standard and Simple. • Standard Execute if vertical lines in printed material are warped or colors are out of alignment. Furthermore, if Simple does not improve printing, try Standard. • Simple Executes simple adjustment in a short time. Execute this when frequently adjusting the printhead, such as during daily inspection. Adjustments for Better Print Quality Adjusting the Printhead • This function is not available with Tracing Paper, Translucent Matte Film, or Clear Film. Important • If adjustment is not possible as expected using special media, try another type of paper, or try Manual adjust- ment. (See "Manual Adjustment to Straighten Lines and Colors.") ➔User's Guide • Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type of paper as you will use for printing. Note • If Standard does not improve printing, try adjusting the printhead manually. (See "Manual Adjustment to Straighten Lines and Colors.") ➔User's Guide • If the printhead position was not adjusted during initial setup or when the printhead was replaced, execute Initial adjustmt. (See "Adjustment When Installing the Printhead.") ➔User's Guide Items to Prepare When Using Rolls When Using Sheets An unused roll at least 254.0 mm (10.00 in) wide Standard : Two sheets of unused paper, A4/Letter size (or one sheet when using A3 or larger) Simple: One sheet of unused paper, A4/Letter size Perform adjustment as follows. 1 Load paper. • Attaching the Roll Holder to Rolls ➔P.12 • Loading Rolls in the Printer ➔P.15 • Loading Sheets in the Printer ➔P.21 • Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment can- not be completed correctly unless the loaded paper matches the settings. Important 89 Basic Guide