Canon imagePROGRAF iPF830 Operation Guide - Page 133
Messages regarding printing or adjustment, Cannot print as specified.
View all Canon imagePROGRAF iPF830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
iPF830 Series Cannot print as specified. Messages regarding printing or adjustment Cannot print as specified...133 Cannot adjust printhead...135 Borderless printng not possible. Paper stretched or shrank 133 Before borderless printing, move the blue platen switch 133 Borderless printng not possible...129 Blue platen switch is dirty...133 Move the blue platen switch No.xx to the right. (xx represents a number 133 Check printed document...134 Cannot print as specified. "Lift the release lever and replace paper with A4/LTR (vertical) or larger." Cause Corrective Action The loaded paper is too small. Switch to paper A4/Letter (vertical) or larger. "Lift the release lever and replace roll with 10 in. wide or larger roll." Cause Corrective Action The loaded paper is too small. Load a roll 10 inches wide or larger. Borderless printng not possible. Paper stretched or shrank. Cause The loaded roll has expanded or contracted due to environmental conditions, making it wider or narrower than the supported width for borderless printing. Corrective Action Press the OK button to stop printing. Use each type of paper only where the recommended environmental conditions are met. For details on environmental conditions for various paper, see the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔User's Guide Before borderless printing, move the blue platen switch. Cause The blue Switch on the platen was set to the side opposite ● when a borderless print job was received. Corrective Action Before borderless printing, set the blue Switch on the platen to the ● side. (See "Setting the Blue Switch on the Platen.") ➔User's Guide Blue platen switch is dirty. Cause The blue Switch on the platen is dirty. Corrective Action Open the Top Cover and clean the blue Switch on the platen. (See "Cleaning Inside the Top Cover.") ➔P.47 Move the blue platen switch No.xx to the right. (xx represents a number) Cause The printer has detected that the blue Switch on the platen needed in maintenance during printing is set away from the ● mark. Corrective Action Set blue platen Switch of the indicated number toward the ● side. (See "Setting the Blue Switch on the Platen.") ➔User's Guide Error Message Messages regarding printing or adjustment 133 Basic Guide