Canon imageRUNNER ADVANCE C2230 imageRUNNER ADVANCE C2200 Srs Setup Guide - Page 15
Press [On] for <Get Printer Mgmt Info from Host>, Press [On] for <Auto Detect>
View all Canon imageRUNNER ADVANCE C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Operations Required to Use the Machine 6 Press [Ethernet Driver Settings]. If the desired setting is not displayed, press or to scroll to the desired setting. 9 Press [On] for → [Dedicated Comm. Settings]. 1 7 Press [On] for → [OK]. 10 Specify the following settings → press [OK]. In this example, the following settings are specified: : [On] : [Read Only] The interface settings are now specified. Next, set the communication environment for the machine and the computers on the network. 8 Press [SNMP Settings]. 11 Press [On] for → [OK]. 15
15
Operations Required to Use the Machine
1
6
Press [Ethernet Driver Settings].
If the desired setting is not displayed, press
or
to scroll to
the desired setting.
7
Press [On] for <Auto Detect>
→
[OK].
The interface settings are now specified. Next, set the
communication environment for the machine and the computers
on the network.
8
Press [SNMP Settings].
9
Press [On] for <Use SNMP v. 1>
→
[Dedicated
Comm. Settings].
10
Specify the following settings
→
press [OK].
In this example, the following settings are specified:
<Dedicated Community>: [On]
<MIB Access Permission>: [Read Only]
11
Press [On] for <Get Printer Mgmt Info from Host>
→
[OK].