Cisco WRT54GS User Manual - Page 28

Wireless-G Broadband Router with SpeedBooster PPTP Connection - PPTP (Point-to-Point Tunneling Protocol) service is used in Europe only. If you are using a PPTP connection, select PPTP from the drop-down menu. User Name - Enter the User Name provided by your ISP. Password - Enter the Password provided by your ISP. Confirm - To confirm the Password, enter it again in this field. IP Address - Enter the IP address provided by your ISP. Subnet Mask- Enter the Subnet Mask provided by your ISP. Gateway - Enter the Gateway IP address provided by your ISP. Click the Next button to continue or the Back button to return to the previous screen. Figure 5-15: Setup Wizard's Advanced Internet Settings L2TP Screen Keep Alive - If you want the Router to periodically check your Internet connection, select Keep Alive. Then specify how often you want the Router to check the Internet connection. If the connection is down, the Router will automatically re-establish your connection. Connect on Demand - If you want the Router to end the Internet connection after it has been inactive for a period of time, select Connect on Demand and designate the number of minutes you want that period of inactivity to last. Click the Next button to continue or the Back button to return to the previous screen. Chapter 5: Setting up the Wireless-G Broadband Router 20 Using the Setup Wizard