Cisco WRT54GS User Manual - Page 68

Wireless-G Broadband Router with SpeedBooster The Status Tab - Router The Router screen on the Status Tab displays the Router's current status. Firmware Version. This is the Router's current firmware. Current Time. This shows the time, as you set on the Setup Tab. MAC Address. This is the Router's MAC Address, as seen by your ISP. Router Name. This is the specific name for the Router, which you set on the Setup Tab. Host Name. If required by your ISP, this would have been entered on the Setup Tab. Domain Name. If required by your ISP, this would have been entered on the Setup Tab. Configuration Type. This shows the information required by your ISP for connection to the Internet. This information was entered on the Setup Tab. You can Connect or Disconnect your connection here by clicking on that button. Figure 6-43: Status Tab - Router mac address: the unique address that a manufacturer assigns to each networking device. isp: your internet provider domain: a specific name for a network of computers Chapter 6: Configuring the Wireless-G Broadband Router 60 The Status Tab - Router