Compaq 222863-001 TaskSmart W2200 Maintenance and Service Guide - Page 24
IMPORTANT, CAUTION, DIMM enters the socket, the latches close
![]() |
View all Compaq 222863-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Removal and Replacement Procedures 2-9 To replace a DIMM on the system board: IMPORTANT: A DIMM can be installed only one way. Be sure to match the key slots on the module with the tabs on the memory slot. Push the module down into the slot until it is fully inserted and properly seated. 1. Identify the correct DIMM socket to populate. See Figure 2-2 earlier in this section. 2. Open the DIMM socket latches if they are not already opened. 3. Align the key slot in the bottom edge of the DIMM with the tab in the expansion socket. CAUTION: The system does not recognize improperly aligned or seated DIMMs. 4. Insert the DIMM at the same angle as the DIMM socket on the system board . As the DIMM enters the socket, the latches close . 22 1 2 Figure 2-4. Replacing a DIMM in a DIMM socket CAUTION: Use only Compaq DIMMs. DIMMs from other sources can adversely affect data integrity. 5. Press down firmly on the DIMM while pushing the latches inward until the latches snap into place.
![](/manual_guide/products/compaq-222863001-tasksmart-w2200-maintenance-service-guide-a4cca1c/24.png)