Compaq 222863-001 TaskSmart W2200 Maintenance and Service Guide - Page 39
Expansion Board, assembly to position the board into the socket.
View all Compaq 222863-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2-24 Compaq TaskSmart W2200 Appliance Server Maintenance and Service Guide Expansion Board To remove an expansion board, complete the following procedures: 1. Power down the server. See "Powering Down the Server" earlier in this chapter. CAUTION: To avoid the risk of damage to your system or expansion boards, remove all power cords before installing or removing expansion boards. When the Power On/Off switch is in the off position, auxiliary power is still connected to the PCI expansion slot and may damage the board. 2. Remove the access panel. See "Access Panel" earlier in this chapter. 3. Disconnect all cables from the expansion board. 4. Remove the PCI riser board assembly. See "PCI Riser Board Assembly" earlier in this chapter. 5. Apply even pressure to pull the expansion board out of its socket in the PCI riser board assembly. Figure 2-19. Removing an expansion board from the PCI riser board assembly To replace an expansion board, reverse steps 2 through 5. Use the PCI board guide on the assembly to position the board into the socket. IMPORTANT: Ensure that the expansion board is securely seated into the expansion slot before replacing the PCI riser board assembly and access panel.