Compaq 222863-001 TaskSmart W2200 Maintenance and Service Guide - Page 46
Remote Insight LightsOut Edition Board Remote Management Cable (Model 30)
![]() |
View all Compaq 222863-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Removal and Replacement Procedures 2-31 Remote Insight Lights-Out Edition Board Remote Management Cable (Model 30) To remove the Remote Insight Lights-Out Edition board remote management cable: 1. Power down the server. See "Powering Down the Server" earlier in this chapter. 2. Remove the access panel. See "Access Panel" earlier in this chapter. 3. Remove the PCI riser board assembly. See "PCI Riser Board Assembly" earlier in this chapter. 4. Remove the center wall. See "Center Wall" earlier in this chapter. 5. Disconnect the Remote Insight Lights-Out Edition board remote management cable from the connector on the Remote Insight Lights-Out Edition board. 6. Disconnect the Remote Insight Lights-Out Edition board remote management cable from the connector on the system board. Figure 2-26. Removing the Remote Insight Lights-Out Edition board remote management cable Reverse steps 2 through 6 to replace the Remote Insight Lights-Out Edition board remote management cable.
![](/manual_guide/products/compaq-222863001-tasksmart-w2200-maintenance-service-guide-a4cca1c/46.png)