Compaq 222863-001 TaskSmart W2200 Maintenance and Service Guide - Page 49

Fans 4 and 5, Lift and remove the fan

Get Compaq 222863-001 - TaskSmart W2200 Model 10 PDF manuals and user guides View all Compaq 222863-001 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

2-34 Compaq TaskSmart W2200 Appliance Server Maintenance and Service Guide Fans 4 and 5 To remove fan 5: 1. Power down the server. See "Powering Down the Server" earlier in this chapter. 2. Remove the access panel. See "Access Panel" earlier in this chapter. 3. Disconnect the fan cable from the fan connector on the system board . 4. Remove the two Phillips-head screws that secure the fan in the chassis . 5. Lift and remove the fan . 3 1 2 2 Figure 2-29. Removing fan 5 from the server 6. Repeat steps 2 through 5 to remove fan 4, if needed. To replace fans 4 and 5, reverse steps 2 through 6.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
2-34
Compaq TaskSmart W2200 Appliance Server Maintenance and Service Guide
Fans 4 and 5
To remove fan 5:
1.
Power down the server. See “Powering Down the Server” earlier in this chapter.
2.
Remove the access panel. See “Access Panel” earlier in this chapter.
3.
Disconnect the fan cable from the fan connector on the system board
.
4.
Remove the two Phillips-head screws that secure the fan in the chassis
.
5.
Lift and remove the fan
.
1
2
3
2
Figure 2-29.
Removing fan 5 from the server
6.
Repeat steps 2 through 5 to remove fan 4, if needed.
To replace fans 4 and 5, reverse steps 2 through 6.