Compaq 222863-001 TaskSmart W2200 Maintenance and Service Guide - Page 74
Power Supply, Memory, Table 5-2, Power Supply Specifications, SDRAM DIMM Specifications
View all Compaq 222863-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Specifications 5-3 Power Supply Table 5-2 Power Supply Specifications Item Input voltage specifications Rated input voltage Rated input line Frequency range Rated input power Rated input current Steady state power Maximum peak power Ambient temperature range Operating Nonoperating Relative humidity (noncondensing) Operating Nonoperating Dielectric voltage withstand Input to output Input to ground Maximum wet-bulb temperature Description 100 VAC to 240 VAC 180 VAC to 264 VAC (90 VAC to 132 VAC) 47 Hz to 63 Hz 298 W 3.3 A, 1.7 A (110 V, 220 V) 180 W 200 W for 2 minutes 5°C to 50°C (41°F to 122°F) -40°C to 85°C (-40°F to 185°F) 5% to 95% 5% to 95% 3,000 VAC/minute 1,500 VAC/minute 28°C (82°F) Memory Table 5-3 SDRAM DIMM Specifications Item Description Size 128 MB (Model 10) 256 MB (Models 20 and 30) Speed 133-MHz speed minimum Width 72 bits Upgrade requirement 128-MB SDRAM DIMM (minimum 128-MB total memory required) Note: Use only 128- or 256-MB, 72-bit wide, 3.3-volt, registered ECC SDRAM. SDRAM must be 133 MHz or faster. Use only Compaq SDRAM.