Compaq ProSignia 500 Compaq ProSignia Family of PC Servers Maintenance and Ser - Page 19
Lift power supply out pulling switch and cable through chassis., Reverse order for replacement.
 |
View all Compaq ProSignia 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
1. Turn power off and remove power cord from rear of unit. 2. Remove side access panel/front bezel/system unit cover. 3. Disconnect all power connectors from boards and or peripheral devices. 4. Remove front power switch bracket retaining screws (2). 5. Pull bracket out and remove power switch, grounding connector, and cable from bracket. 6. Remove screws at rear of power supply (4). 7. Lift power supply out pulling switch and cable through chassis. 8. Reverse order for replacement. NOTE: When replacing power supply, make sure that the power switch cable is properly threaded through the bracket strain relief.
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
 |
 |
1. Turn power off and remove power cord from rear of unit.
2. Remove side access panel/front bezel/system unit cover.
3. Disconnect all power connectors from boards and or peripheral devices.
4. Remove front power switch bracket retaining screws (2).
5. Pull bracket out and remove power switch, grounding connector, and
cable from bracket.
6. Remove screws at rear of power supply (4).
7. Lift power supply out pulling switch and cable through chassis.
8. Reverse order for replacement.
NOTE: When replacing power supply, make sure that the power switch cable is
properly threaded through the bracket strain relief.