Compaq ProSignia 500 Compaq ProSignia Family of PC Servers Maintenance and Ser - Page 65
Read/Write Capacity per Diskette, Table 5-5. IDE Hard Drives - prosignia 300
View all Compaq ProSignia 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
* COMPAQ only supports 16-MB SIMMS that use 16-megabit DRAM chips. SIMM modules that use 4-megabit DRAM chips are not supported. # The COMPAQ ProSignia supports a maximum of 128 MB of system RAM. The standard 4 or 8 megabytes of system board memory will be ignored if all 4 SIMM sockets have 32-MB SIMMs installed. Table 5-4. Internal Diskette Drives 1.44-MB (standard) 1.2-MB (optional) Size 3 1/2-In 5 1/4-In LED Indicators (front panel) Green Green Read/Write Capacity per Diskette (high/low density) 1.44 MB/720 KB 1.2 MB/360 KB Drive Supported One One Drive Height One-third One-third Drive Rotation (rpm) 300 360 Transfer Rate bits/sec (high/low) 500 K/250 K 500 K/300 K Bytes/Sector 512 512 Sectors/Track (high/low) 18/9 15/9 Tracks/Side (high/low) 80/80 80/40 Access Times: Track-to-Track (high/low) 3 ms/6 ms 3 ms/10 ms Average (high/low) 169/94 ms 148.3 ms/95 ms Settling Time 15 ms 15 ms Latency Average 100 ms 84 ms Cylinders (high/low) 80/80 80/40 Read/Write Heads Two Two Table 5-5. IDE Hard Drives 510-MB 340-MB 210-MB Height Half Half Half Size 3.5 in 3.5 in 3.5 in Drive Type 61 63 51 Controller Integrated Integrated Integrated Logical Configuration: Cylinders 989 659 683 Heads 16 16 16 Sectors per Track 63 63 38 Bytes per Sector 512 512 512