Compaq ProSignia 500 Compaq ProSignia Family of PC Servers Maintenance and Ser - Page 23

178-Processor Processor type or Run the EISA Configuration Invalid step does not match Configuration Utility configuration memory. and correct. 179-System Revision A board was installed Run the EISA Mismatch which has a different Configuration Utility revision date. and correct. 201-Memory Error RAM failure Run Diagnostics. 203-Memory Address Error RAM failure Run Diagnostics. 205-Processor Slot X Cache memory error. Replace the processor Cache Memory Error board in the slot indicated. 10 205-Memory Error Cache memory Run Diagnostics and controller or RAM replace failed assembly. failure 206-Processor Slot X Cache memory Replace the processor Cache Controller Error controller or RAM board in the slot failure. indicated. Error Code Probable Source Action of Problem 207-Invalid Memory Memory module Verify placement of Configuration installed incorrectly. memory modules. 208-Invalid Memory Speed The speed of the The speed of the `xxyy - memory is too slow, memory modules must be where: xx00 = 60, 70 or 80 ns. expansion board SIMMs Verify the speed of are too slow, or 00yy the memory modules = system board SIMMs installed and replace. are too slow; xx and yy have corresponding bit set. 209-NCA RAM Error RAM failure Run Diagnostics and replace failed assembly. 212-Processor Slot X Processor in Slot X Replace the processor System Processor Failed failure. in the slot indicated. 213-Processor Slot X- System processor Install processor in System Processor Not configured for slot the slot indicated or Installed indicated is missing. run the EISA Configuration Utility to remove the processor from the .CFG file. 301-Keyboard Error Keyboard failure. Turn off the computer, then reconnect the keyboard. 301-Keyboard Error or Keyboard failure. Replace the keyboard.