Compaq ProSignia 500 Compaq ProSignia Family of PC Servers Maintenance and Ser - Page 28

Valid Data Found in, Replace the Array

Get Compaq ProSignia 500 PDF manuals and user guides View all Compaq ProSignia 500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

wrong drive type. Configuration Utility and Diagnostics and correct. Error Code Probable Source Action of Problem 1792-Slot # Drive Array This indicates that No action necessary; - Valid Data Found in while the system was no data has been lost. Array Accelerator. Data in use, power was Perform orderly system will automatically be interrupted while system shut-downs to written to drive array. data was in the Array avoid data remaining Accelerator memory. in the Array Power was then Accelerator. restored within eight to ten days, and the data in the Array Accelerator was flushed to the drive array. 1793-Slot # Drive Array This indicates that Power was not restored - Array Accelerator while the system was within eight to ten Battery Depleted. Data in use, power was days. Perform orderly in Array Accelerator has interrupted while system shut-downs to been lost. (Error data was in the avoid data remaining in message 1794 also Array Accelerator the Array Accelerator. displays.) memory. Array Accelerator batteries failed. Data in Array Accelerator has been lost. 1794-Slot # Drive Array This is a warning Replace the Array Accelerator Battery that the battery Accelerator board if Charge Low. charge is below 75%. batteries do not Array Accelerator is Posted writes are recharge within 36 temporarily disabled. disabled. power-on hours. Array Accelerator will be reenabled when battery reaches full charge. 1795-Slot # Drive Array This indicates that 1. Match the Array - Array Accelerator while the system was Accelerator to the Configuration Error. in use, power was correct drive array. Data does not correspond interrupted while -Or- to this drive array. data was in the Array 2. Run the EISA Array Accelerator is Accelerator memory. Configuration temporarily disabled. The data stored in the Utility to clear the Array Accelerator does data in the Array not correspond to this Accelerator. drive array. 1796-Slot # Drive Array Array Accelerator is 1. Check that the - Array Accelerator is defective or has been Array Accelerator is Not Responding. removed. properly seated. Array Accelerator is 2. Run the EISA temporarily disabled. Configuration Utility to

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
wrong drive type.
Configuration Utility
and Diagnostics and
correct.
---------------------------------------------------------------------------
Error Code
Probable Source
Action
of Problem
---------------------------------------------------------------------------
1792-Slot # Drive Array
This indicates that
No action necessary;
- Valid Data Found in
while the system was
no data has been lost.
Array Accelerator. Data
in use, power was
Perform orderly system
will automatically be
interrupted while
system shut-downs to
written to drive array.
data was in the Array
avoid data remaining
Accelerator memory.
in the Array
Power was then
Accelerator.
restored within eight
to ten days, and the
data in the Array
Accelerator was
flushed to the drive
array.
---------------------------------------------------------------------------
1793-Slot # Drive Array
This indicates that
Power was not restored
- Array Accelerator
while the system was
within eight to ten
Battery Depleted. Data
in use, power was
days. Perform orderly
in Array Accelerator has
interrupted while
system shut-downs to
been lost. (Error
data was in the
avoid data remaining in
message 1794 also
Array Accelerator
the Array Accelerator.
displays.)
memory. Array
Accelerator batteries
failed. Data in Array
Accelerator has been
lost.
---------------------------------------------------------------------------
1794-Slot # Drive Array
This is a warning
Replace the Array
Accelerator Battery
that the battery
Accelerator board if
Charge Low.
charge is below 75%.
batteries do not
Array Accelerator is
Posted writes are
recharge within 36
temporarily disabled.
disabled.
power-on hours.
Array Accelerator will
be reenabled when
battery reaches full
charge.
---------------------------------------------------------------------------
1795-Slot # Drive Array
This indicates that
1. Match the Array
- Array Accelerator
while the system was
Accelerator to the
Configuration Error.
in use, power was
correct drive array.
Data does not correspond
interrupted while
-Or-
to this drive array.
data was in the Array
2. Run the EISA
Array Accelerator is
Accelerator memory.
Configuration
temporarily disabled.
The data stored in the
Utility to clear the
Array Accelerator does
data in the Array
not correspond to this
Accelerator.
drive array.
---------------------------------------------------------------------------
1796-Slot # Drive Array
Array Accelerator is
1. Check that the
- Array Accelerator is
defective or has been
Array Accelerator is
Not Responding.
removed.
properly seated.
Array Accelerator is
2. Run the EISA
temporarily disabled.
Configuration
Utility to