D-Link DCS-6511 Product Manual - Page 35

Network Setup - d link default ip

Get D-Link DCS-6511 PDF manuals and user guides View all D-Link DCS-6511 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Section 3 - Configuration Network Setup Use this section to configure the network connections for your camera. All relevant information must be entered accurately. LAN Settings: Settings for your local area network. DHCP: Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically. Static IP Address: You may obtain a static or fixed IP address and other network information from your network administrator for your camera. A static IP address may simplify access to your camera in the future. IP Address: Enter the fixed IP address in this field. Subnet Mask: This number is used to determine if the destination is in the same subnet. The default value is 255.255.255.0. Default Gateway: The gateway used to forward frames to destinations in a different subnet. Invalid gateway settings may cause the failure of transmissions to a different subnet. Primary DNS: The primary domain name server translates names to IP addresses. Secondary DNS: The secondary DNS acts as a backup to the primary DNS. Enable UPnP: Enabling this setting allows your camera to be configured as a UPnP device on your network. Enable UPnP Port Enabling this setting allows the camera to add port forwarding entries into the router automatically on a UPnP capable Forwarding: network. D-Link DCS-6511 User Manual 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
35
D-Link DCS-6511 User Manual
Section 3 - Configuration
Network Setup
LAN Settings:
DHCP:
Static IP Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP:
Enable UPnP Port
Forwarding:
Settings for your local area network.
Select this connection if you have a DHCP server running on
your network and would like your camera to obtain an IP address
automatically.
You may obtain a static or fixed IP address and other network
information from your network administrator for your camera. A
static IP address may simplify access to your camera in the future.
Enter the fixed IP address in this field.
This number is used to determine if the destination is in the same
subnet. The default value is 255.255.255.0.
The gateway used to forward frames to destinations in a different
subnet. Invalid gateway settings may cause the failure of
transmissions to a different subnet.
The primary domain name server translates names to IP addresses.
The secondary DNS acts as a backup to the primary DNS.
Enabling this setting allows your camera to be configured as a UPnP
device on your network.
Enabling this setting allows the camera to add port forwarding entries into the router automatically on a UPnP capable
network.
Use this section to configure the network connections for your camera. All relevant information must be entered accurately.