D-Link DCS-7110 Product Manual - Page 12
Cable Connections
UPC - 790069350207
View all D-Link DCS-7110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation Cable Connections Basic Connection (without PoE) 1. Connect the camera to your switch or router via Ethernet cable. 2. Connect the power cable from the camera to the supplied power adapter. 3. Connect the supplied power adapter to a power outlet. Connection Using a PoE Switch If using a PoE switch or router, connect the network camera via Ethernet cable. PoE will transmit both power and data over a single cable. Note: Once power has been established, the LED will turn red. When the device has obtained an IP address and is accessible, the LED will turn green. D-Link DCS-7110 User Manual 12
12
D-Link DCS-7110 User Manual
Installation
Basic Connection (without PoE)
1. Connect the camera to your switch or router via Ethernet cable.
2. Connect the power cable from the camera to the supplied power adapter.
3. Connect the supplied power adapter to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable. PoE will transmit both power and data over a single cable.
Note:
Once power has been established, the LED will turn red. When the device has obtained an IP address and is accessible, the LED will turn green.
Cable Connections