D-Link DGS-3048 Product Manual - Page 100
Authentication Server Host Setting - Add Window
UPC - 790069287367
View all D-Link DGS-3048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
DGS-3048 Gigabit Ethernet Switch Manual Figure 10- 11. Authentication Server Host Settings Window To add an Authentication Server Host, click the Add button, revealing the following window: Figure 10- 12. Authentication Server Host Setting - Add Window Configure the following parameters to add an Authentication Server Host: Parameter Description IP Address The IP address of the remote server host the user wishes to add. Protocol The protocol used by the server host. The user may choose one of the following: TACACS+ - Enter this parameter if the server host utilizes the TACACS+ protocol. RADIUS - Enter this parameter if the server host utilizes the RADIUS protocol. Port (1-65535) Enter a number between 1 and 65535 to define the virtual port number of the authentication protocol on a server host. Timeout (1-30) Enter the time in seconds the Switch will wait for the server host to reply to an authentication request. Retransmit (1-10) Enter the value in the retransmit field to change how many times the device will resend an authentication request when the TACACS server does not respond. Key Authentication key to be shared with a configured TACACS+ or RADIUS servers only. Specify an alphanumeric string up to 254 characters. Click Apply to add the server host. NOTE: More than one authentication protocol can be run on the same physical server host but, remember that TACACS+ are separate entities and are not compatible with each other 88