D-Link DGS-3048 Product Manual - Page 31
Switch Information, Switch Information Basic Settings Window - vlan
UPC - 790069287367
View all D-Link DGS-3048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
DGS-3048 Gigabit Ethernet Switch Manual NOTE: Be sure to configure the user name and password in the User Account Management window (Administration → User Accounts) before connecting the Switch to the greater network. Switch Information Figure 6-3. Switch Information (Basic Settings) Window The following fields can be set: Parameter Description Serial Port Auto Logout This setting for the restart of the console is 2 Minutes, 5 Minutes, 10 Minutes, 15 Minutes, or Never. The default is 10 Minutes. Serial Port Baud Rate Determines the serial port bit rate that will be used the next time the Switch is restarted. Available speeds are 9600, 19,200, 38,400, and 115,200 bits per second. The default setting is 9600. MAC Address Aging Time (0-10) Minutes This field specifies the length of time a learned MAC Address will remain in the forwarding table without being accessed (that is, how long a learned MAC Address is allowed to remain idle). To change this, type in a different value representing the MAC address age-out time in seconds. The MAC Address Aging Time can be set to any value between 1 and 10. The default setting is 5. IGMP Snooping This indicates if Internet Group Management Protocol (IGMP) Snooping is enabled on the Switch. When enabled, this feature instructs the Switch to read IGMP packets being forwarded through the Switch in order to obtain forwarding information from them (learn which ports contain Multicast members). The Switch's IGMP snooping state can be changed on the IGMP Snooping Settings window (L2 Features → IGMP Snooping → IGMP Snooping Setting). The default is Disabled. Multicast Only Router This field enables or disables the multicast router. The default is disabled. GVRP This indicates if Group VLAN Registration Protocol (GVRP) is enabled on the Switch. GVRP is a protocol that allows members to dynamically join VLANs. The Switch's GVRP settings can be changed on the GVRP Settings window (L2 Features → VLAN → GVRP Settings)The default is Disabled. 19