D-Link DGS-3048 Product Manual - Page 85
Bandwidth Control, Bandwidth Control Window, Parameter, Description
UPC - 790069287367
View all D-Link DGS-3048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
DGS-3048 Gigabit Ethernet Switch Manual Bandwidth Control Bandwidth control limits the amount of Multicast and Broadcast frames accepted and forwarded by the device. When Layer 2 frames are forwarded, Broadcast and Multicast frames are flooded to all ports on the relevant VLAN. This occupies bandwidth, and loads all nodes on all ports. Figure 9- 2. Bandwidth Control Window The following fields can be set: Parameter Description Port Rate Indicates the port from/to which storm control is enabled. The maximum rate (kilobytes per second) at which unknown packets are forwarded 73
DGS-3048 Gigabit Ethernet Switch Manual
Bandwidth Control
Bandwidth control limits the amount of Multicast and Broadcast frames accepted and forwarded by the device.
When Layer 2 frames are forwarded, Broadcast and Multicast frames are flooded to all ports on the relevant
VLAN. This occupies bandwidth, and loads all nodes on all ports.
Figure 9- 2. Bandwidth Control Window
The following fields can be set:
Parameter
Description
Port
Indicates the port from/to which storm control is enabled.
Rate
The maximum rate (kilobytes per second) at which unknown packets are forwarded
73