D-Link DGS-3048 Product Manual - Page 41
System Log Settings, System Log Servers Window, Parameter, Description, Index, Server IP
UPC - 790069287367
View all D-Link DGS-3048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
DGS-3048 Gigabit Ethernet Switch Manual cannot be the same port. System Log Settings The Switch can send Syslog messages to up to four designated servers using the System Log Server. In the Administration folder, click System Log Settings, to view the window shown below. Figure 7- 9. System Log Servers Window The parameters configured for adding and editing System Log Server settings are the same. To add a new Syslog Server, click the Add button. To modify a current entry, click the hyperlinked number of the server in the Index field. Both actions will result in the same window to configure. See the table below for a description of the parameters in the following window. Figure 7- 10. System Log Server - Add Window The following parameters can be set: Parameter Description Index Server IP Severity Facility Syslog server settings index. The IP address of the Syslog server. This drop-down menu allows you to select the level of messages that will be sent. The options are Warning, Informational, and ALL. Some of the operating system daemons and processes have been assigned Facility values. Processes and daemons that have not been explicitly assigned a Facility may use any of the "local use" facilities or they may use the "user-level" Facility. Those Facilities that have been designated are shown in the following. Bold font denotes the facility values that the Switch currently implements. Numerical Facility Code 29