D-Link DGS-3048 Product Manual - Page 34
IP Address, Parameter, Description, Switch IP Settings Window, Get IP From, Subnet Mask
![]() |
UPC - 790069287367
View all D-Link DGS-3048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Parameter DGS-3048 Gigabit Ethernet Switch Manual Description system. You may also want to include a phone number or extension. IP Address Figure 7-2. Switch IP Settings Window This window is used to determine whether the Switch should get its IP Address settings from the user (Manual), a DHCP server. If you are not using DHCP, enter the IP Address, Subnet Mask, and Default Gateway of the Switch. If you enable DHCP, a Dynamic Host Configuration Protocol request will be sent when the Switch is powered up. Once you have selected a setting under Get IP From, click Apply to activate the new settings. The information is described as follows: Parameter Description Get IP From There are two choices for how the Switch receives its IP Address settings: Manual and DHCP. IP Address The host address for the device on the TCP/IP network. Subnet Mask The address mask that controls subnetting on your TCP/IP network. Default Gateway Management VLAN Name The IP address of the device-usually a router-that handles connections to other subnets and/or other TCP/IP networks. Name of Management VLAN 22
![](/manual_guide/products/dlink-dgs3048-product-manual-b29c763/34.png)