D-Link DI-707P Product Manual - Page 13
Home > WAN > Dynamic IP Address, Host Name, MAC Address, Clone, Auto-reconnect, Primary DNS - default ip
![]() |
UPC - 790069241000
View all D-Link DI-707P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Using the Configuration Menu Home > WAN > Dynamic IP Address Most Cable modem users will select this option to obtain an IP Address automatically from their ISP (Internet Service Provider). Host Name- This is optional, but may be required by some ISPs. The host name is the device name of the Router. MAC AddressClone MAC Address- Primary DNS Address- The default MAC Address is set to the WAN's physical interface MAC address on the Router. This feature will copy the MAC address of the Ethernet card, and replace the WAN MAC address of the Router with this Ethernet card MAC address. It is not recommended that you change the default MAC address unless required by your ISP. Input the primary DNS address provided by your ISP Secondary DNS Address- (Optional) Input the Secondary DNS address provided by your ISP. MTU- Maximum Transmission Unit; default is 1500; you may need to change the MTU to conform to your ISP. Auto-reconnect - If enabled, the Broadband Router will automatically connect to your ISP after your system is restarted or if the connection is dropped. 13
![](/manual_guide/products/dlink-di707p-product-manual-bf6da3d/13.png)