D-Link DI-707P Product Manual - Page 75
Resetting the DI-707P to the Factory Default Settings, please
![]() |
UPC - 790069241000
View all D-Link DI-707P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Resetting the DI-707P to the Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-707P to the factory default settings. To hard-reset the D-Link DI-707P to the Factory Default Settings, please do the following: Locate the Reset button on the back of the DI-707P. Use a paper clip to press the Reset button and power on. Hold for about 5 seconds (don't hold too long) and then release. (Or, release when M1 and M2 flash at the same time.) After you have completed the above steps, the DI-707P will be reset to the factory default settings. 75
![](/manual_guide/products/dlink-di707p-product-manual-bf6da3d/75.png)
75
After you have tried other methods for troubleshooting your network, you may
choose to
Reset
the DI-707P to the factory default settings.
To hard-reset the D-Link DI-707P to the Factory Default Settings, please do
the following:
Resetting the DI-707P to the Factory Default Settings
±
±
Use a paper clip to press the
Reset
button and
power on.
Locate the
Reset
button on the back of the DI-707P.
±
After you have completed the above steps, the DI-707P
will be reset to the factory default settings.
±
Hold for about 5 seconds (don’t hold too long) and
then release. (Or, release when M1 and M2 flash
at the same time.)