D-Link DSA 5100 Product Manual - Page 17
System Configuration > WAN1 Configuration > Static IP Mode, IP address, Subnet, Default, Gateway
![]() |
UPC - 790069266492
View all D-Link DSA 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Using the Configuration Utility (continued) System Configuration > WAN1 Configuration > Static IP Mode Static IP Address: IP address: Enter the IP address provided to you by your ISP (Required). Subnet mask: Enter the subnet mask provided to you by your ISP. All devices on the network must share the same subnet mask (Required). Default Gateway: Primary DNS Server: Secondary DNS Server: Enter the gateway IP address provided to you by your ISP (Required). Enter the IP address of the primary DNS server (Required). Enter the IP address of the secondary DNS server (Optional). Bridge Mode: This device can be configured in Bridge mode. All interfaces bind to the same IP. Only one set of IP addresses can be used for management. The advantage is that there is no need to readjust any network infrastructure, just plug and use. When you click Enable, the VLAN function of the Public LAN is disabled. Note: WAN1 must have a static IP address in order to utilize the 802.3ad WAN link aggregation feature. If you cancel the static IP address, then the option of choice for 802.3ad is also canceled. (Please see the WAN2 configuration that follows for information on configuring 802.3ad.) 17
![](/manual_guide/products/dlink-dsa-5100-product-manual-760b223/17.png)