D-Link DSA 5100 Product Manual - Page 54
Utilities > Firmware Upgrade, Utilities > Restart, Browse, Submit
![]() |
UPC - 790069266492
View all D-Link DSA 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Using the Configuration Utility (continued) Utilities > Firmware Upgrade You may obtain firmware upgrades from D-Link's support website: http://support.dlink.com Warning: A Firmware upgrade may cause data loss on setup. Please refer to the version description to see if there is any limitation before upgrading your firmware. Click Browse to browse the files. After you have found the firmware, click Submit and the browser will upload the file to the system. The system will start upgrading the firmware. You must restart the system before the firmware upgrade is effective. If you have modified any setting, remember to save the setting before restarting the system. Warning: Please restart the system through the management interface. Do not turn off the system directly and then turn on the power again. (Doing so may damage the unit.) Utilities > Restart This function allows you to safely restart the system. It takes about one minute. OFF: If you need to turn OFF the power, we recommend that you first RESTART the system, and then turn OFF the power, AFTER you hear a beep. Warning: All online users connected to the system will be disconnected when the system is restarted. 54
![](/manual_guide/products/dlink-dsa-5100-product-manual-760b223/54.png)