D-Link DSS-200G-10MP Product Manual - Page 128
Configuration Restore & Backup, Configuration Backup to HTTP, Reset
View all D-Link DSS-200G-10MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
D-Link DSS-200G MP/MPP series Switch User Manual Configuration Restore & Backup Configuration Restore from HTTP This window is used to initiate a configuration restore from a local PC using HTTP. NOTE: If the switch is in HTTPS mode, the firmware or configuration cannot be upgraded using regular HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as shown below: Figure 5-19 Configuration Restore from HTTP window The fields that can be configured are described below: Parameter Source File Description Enter the source filename and path of the configuration file located on the local PC. Alternatively click the Browse button to navigate to the location of the configuration file located on the local PC. Click the Apply button to initiate the configuration restore. Click Effective immediately (running-config) to have the uploaded configuration loaded immediately. Click Take effect after the next boot (startup-config) to load the configuration after the switch has been rebooted. Configuration Backup to HTTP This window is used to initiate a configuration file backup to a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as shown below: Figure 5-20 Configuration Backup to HTTP window Select Include username password to save the switch user accounts and passwords to the backup file. Select Exclude username password to save the switch user accounts and passwords to the backup file. Click the Apply button to initiate the configuration file backup. Reset This window is used to reset the switch's configuration to the factory default settings. 123