D-Link DSS-200G-10MP Product Manual - Page 44
System Log, UDP Port 514
View all D-Link DSS-200G-10MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
D-Link DSS-200G MP/MPP series Switch User Manual Host IPv4 Address Enter the system log server's IPv4 address here. UDP Port (514,1024-65535) Enter the system log server's UDP port number here. This value must be 514 or between1024 and 65535. Facility Specifies an application from which system logs are sent to the remote server. Only one facility can be assigned to a single server. If a second facility level is assigned, the first facility is overwritten. There are up to eight facilities can be assigned (Local 0 to Local 7). Severity Select the severity value of the type of information that will be logged. Options to choose from are Warning, informational, and All The possible levels are: Warning - The lowest level of a device warning. The device is functioning, but an operational problem has occurred. Informational - Provides device information. All - Displays all levels of system logs. Click the Apply button to accept the changes made. System Log This window is used to view and clear the system log. To view the following window, click System > System Log > System Log, as shown below: Figure 4-18 System Log window Click the Clear Log button to clear the system log entries displayed in the table. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 39