D-Link DSS-200G-10MP Product Manual - Page 37
IPv6 Interface, System > System Information Settings > IPv6 Interface
View all D-Link DSS-200G-10MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
D-Link DSS-200G MP/MPP series Switch User Manual Figure 4-8 Peripheral Settings window The fields that can be configured are described below: Parameter Get IP From IP Address Mask Gateway DHCP Retry Time(5-120) Description Select DHCP to automatically obtain an IP address. Select Static to manually configure the IP address settings. BOOTP allows the switch to get an IP configuration using the BOOTP protocol. If Static is selected, enter the IP address of the switch. If DHCP or BOOTP is selected, the automatically obtained IP address will be displayed. If Static is selected, enter the IP address of the switch. If DHCP or BOOTP is selected, the automatically obtained network mask will be displayed. If Static is selected, enter the IP address of the switch. If DHCP or BOOTP is selected, the automatically obtained gateway will be displayed. If DHCP is selected, enter the number of times to retry obtaining an IP address. Click the Apply button to accept the changes made. IPv6 Interface This window is used to configure the IPv6 settings of the switch. To view the following window, click System > System Information Settings > IPv6 Interface, as shown below: Figure 4-9 Peripheral Settings window The fields that can be configured are described below: Parameter IPv6 State Static IPv6 Address Description Select whether to Enable or Disable IPv6 functionality. If enabled, enter the static IPv6 address of the switch. Click the Apply button to accept the changes made. 32