Dell Alienware Area-51m Service Manual - Page 16
Removing the base cover, Procedure
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Removing the base cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Loose the six captive screws that secure the base cover to the computer base. 2 Starting from the middle of the bottom side, pry open the base cover with a plastic scribe. 3 Slide the base cover off the computer base. 4 Disconnect the battery cable from the system board. 5 Press and hold the power button for five seconds to ground the system board. 16