Dell Alienware Area-51m Service Manual - Page 74
Replacing the graphics card, Procedure, Post-requisites
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Replacing the graphics card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Place the graphics card on the system board and align the screw holes on the graphics card with the screw holes on the system board. 2 Replace the three screws (M2x3) that secure the graphics card to the system board. 3 Replace the two screws (M2x3) that secure the two graphics-card cables to the graphics card. 4 Connect the graphics-card power cable to the graphics card. 5 Connect the graphics-card power cable to the system board. Post-requisites 1 Replace the heat-sink assembly. 2 Replace the computer base. 3 Replace the rear I/O cover 4 Replace the wireless card. 5 Replace the solid-state drive (in SSD1 slot). 74