Dell Alienware Area-51m Service Manual - Page 42
Replacing the audio daughter-board, Procedure, Post-requisites
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Replacing the audio daughter-board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Slide the audio daughter-board at an angle into the slot on the palm-rest assembly. 2 Replace the three screws (M2.5x2.5) that secure the audio daughter-board to the palm-rest assembly. 3 Connect the audio daughter-board cable to the connector on the audio daughter-board and close the latch to secure the cable. 4 Adhere the tape that secures the audio daughter-board cable. 5 Connect the speaker cable to the audio daughter-board. Post-requisites 1 Replace the base cover. 2 Follow the procedure from step 4 to step 7 in Replacing the hard drive. 42