Dell Alienware Area-51m Service Manual - Page 77
Open the latch and disconnect the keyboard cable from the system board.
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2 Turn the palm-rest assembly over. 3 Remove the two screws (M2x3) that secure the graphics card cables on the system board. 4 Lift the two graphics card cables off the system board. 5 Peel the tape that secures the audio daughter-board cable to the system board. 6 Open the latch and disconnect the audio daughter-board cable from the system board. 7 Open the latch and disconnect the touchpad cable from the system board. 8 Open the latch and disconnect the keyboard cable from the system board. 9 Remove the two screws (M2.5x5) that secure the system board to the palm-rest assembly. 10 Lift the system board off the palm-rest assembly along with the right power-adapter port. 77
2
Turn the palm-rest assembly over.
3
Remove the two screws (M2x3) that secure the graphics card cables on the system board.
4
Lift the two graphics card cables off the system board.
5
Peel the tape that secures the audio daughter-board cable to the system board.
6
Open the latch and disconnect the audio daughter-board cable from the system board.
7
Open the latch and disconnect the touchpad cable from the system board.
8
Open the latch and disconnect the keyboard cable from the system board.
9
Remove the two screws (M2.5x5) that secure the system board to the palm-rest assembly.
10
Lift the system board off the palm-rest assembly along with the right power-adapter port.
77