Dell Alienware Area-51m Service Manual - Page 46
Removing the coin-cell battery, Prerequisites, Procedure
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Removing the coin-cell battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Removing the coin-cell battery resets the BIOS setup program's settings to default. It is recommended that you note the BIOS setup program's settings before removing the coin-cell battery. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the solid-state drive (in SSD2 slot). Procedure 1 Disconnect the coin-cell battery cable from the system board. 2 Using a plastic scribe, pry off the coin-cell battery from the system board. 46