Dell Alienware Area-51m Service Manual - Page 67
Replacing the left power-adapter port, Procedure, Post-requisites
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Replacing the left power-adapter port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Route the right power-adapter port cable under the left power-adapter port cable and place both power-adapter ports into the slots on the palm-rest assembly. 2 Connect the right power-adapter port cable to the system board. 3 Slide and place the power-adapter board bracket on the palm-rest assembly. 4 Replace the screw (M2x3) that secures the power-adapter port bracket to the palm-rest assembly. Post-requisites 1 Replace the heat-sink assembly. 2 Replace the computer base. 3 Replace the rear I/O cover 4 Replace the wireless card. 5 Replace the solid-state drive (in SSD1 slot). 6 Replace the battery. 67