Dell Alienware Area-51m Service Manual - Page 48
Removing the touchpad, Prerequisites, Procedure
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Removing the touchpad WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the solid-state drive (in SSD2 slot). 4 Follow the procedure from step 1 to step 4 in Removing the hard drive. 5 Remove the speakers. 6 Remove the computer base. Procedure 1 Open the latch and disconnect the touchpad cable from the system board. 2 Peel off the touchpad cable from the touchpad bracket. 3 Open the latch and disconnect the touchpad-button cable from the touchpad. 4 Remove the five screws (M2x2.5) that secure the touchpad bracket to the palm-rest assembly. 5 Slide the touchpad bracket at an angle and lift it off the palm-rest assembly. 48