Dell Alienware Area-51m Service Manual - Page 66
Removing the left power-adapter port, Prerequisites, Procedure
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Removing the left power-adapter port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the wireless card. 4 Remove the solid-state drive (in SSD1 slot). 5 Remove the rear-I/O cover. 6 Remove the computer base. 7 Remove the heat-sink assembly. Procedure 1 Remove the screw (M2x3) that secures the power-adapter port bracket to the palm-rest assembly. 2 Slide the power-adapter port bracket off the palm-rest assembly. 3 Lift both power-adapter ports off the palm-rest assembly to uncross the cables. 4 Disconnect the right power-adapter port cable from the system board. 66