Dell Alienware Area-51m Service Manual - Page 52
Removing the display assembly, Prerequisites, Procedure
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Removing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the wireless card. 3 Remove the rear-I/O cover. Procedure 1 Remove the screw (M2x3) that secures the display-cable bracket to the system board. 2 Lift the display-cable bracket off the system board. 3 Using the pull tab, disconnect the display cable from the system board. 4 Disconnect the camera cable from the system board. 5 Peel off the display cable and the camera cable from the computer base. 6 Disconnect the tobii cable from the system board. 7 Remove the antenna cables from the routing guides on the computer base. 8 Peel off the tobii cable from the computer base. 52