Dell Alienware Area-51m Service Manual - Page 82
Post-requisites, Entering the Service Tag in the BIOS setup program, Service Tag Input
View all Dell Alienware Area-51m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
11 Connect the power-button board cable to the system board. Post-requisites 1 Replace the processor. 2 Replace the graphics card. 3 Replace the right power-adapter port. 4 Replace the heat-sink assembly. 5 Replace the coin-cell battery. 6 Replace the computer base. 7 Replace the rear I/O cover 8 Replace the wireless card. 9 Replace the solid-state drive. 10 Replace the memory modules. 11 Replace the battery. 12 Replace the base cover. Entering the Service Tag in the BIOS setup program 1 Turn on or restart your computer. 2 Press F2 when the Dell logo is displayed to enter the BIOS setup program. 3 Navigate to the Main tab and enter the Service Tag in the Service Tag Input field. NOTE: Service tag is the alphanumeric identifier located at the back side of your computer. 82