Dell Alienware m15 R7 Service Manual - Page 32
Rear-I/O cover, Removing the rear-I/O cover
View all Dell Alienware m15 R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Rear-I/O cover Removing the rear-I/O cover Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the rear-I/O cover and provides a visual representation of the removal procedure. Steps 1. Remove the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly. 2. Remove the three screws (M2x2) that secure the rear I/O-cover to the palm-rest and keyboard assembly. 3. Disconnect the Tron-light cable from the system board. NOTE: To prevent damaging your computer, ensure that the Tron-light cable has been disconnected from the system board before removing the rear I/O-cover. 4. Firmly grasp the sides of your computer with both hands and push the rubber feet on the rear I/O-cover outwards with your thumbs to release the rear I/O-cover from the palm-rest and keyboard assembly. 5. Remove the rear I/O-cover from the palm-rest and keyboard assembly. 32