Dell Alienware m15 R7 Service Manual - Page 33
Installing the rear-I/O cover, Prerequisites, About this task, Steps, Next steps
View all Dell Alienware m15 R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installing the rear-I/O cover Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the rear-I/O cover and provides a visual representation of the installation procedure. Steps 1. With the correct orientation, slide the rear I/O-cover into the palm-rest and keyboard assembly, and snap it into place. NOTE: To avoiding damaging your computer, ensure the Tron-light cable is not pinched before snapping the rear I/O-cover into place. 2. Replace the three screws (M2x2) that secure the rear I/O-cover to the palm-rest and keyboard assembly. 3. Replace the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly. 4. Connect the Tron-light cable to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 33