Dell Alienware m15 R7 Service Manual - Page 39
Power-adapter port, Removing the power-adapter port
View all Dell Alienware m15 R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Steps 1. Using the alignment posts, place the left and right speakers into their slots on the palm-rest and keyboard assembly. NOTE: Ensure that the alignment posts are threaded through the rubber grommets on the speaker. 2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 3. Adhere the tape that secures the speaker cable to the palm-rest and keyboard assembly. 4. Connect the speaker cable to the system board. Next steps 1. Install the 2230 solid-state drive or 2280 solid-state drive in slot two, whichever applicable. 2. Install the battery. 3. Install the base cover. 4. Follow the procedure in After working inside your computer. Power-adapter port Removing the power-adapter port Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the rear-I/O cover. About this task The following image(s) indicate the location of the power-adapter port and provides a visual representation of the removal procedure. 39