Dell Alienware m15 R7 Service Manual - Page 43
Steps, Next steps
View all Dell Alienware m15 R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Steps 1. At an angle slide the touchpad into the slot on the palm-rest and keyboard assembly. 2. Turn the computer over and open the display to ensure that the touchpad is equally aligned on all sides. NOTE: The image below shows the proper touchpad alignment for your computer. 3. Close the display and turn the computer over. 4. Replace the two screws (M2x2) that secure the touchpad to the palm-rest and keyboard assembly. 5. Align the screw holes on the touchpad bracket to the screw holes on the palm-rest and keyboard assembly. 6. Replace the two screws (M2.5x2.5) that secure the touchpad bracket to the palm-rest and keyboard assembly. 7. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 8. Adhere the tape that secures the speaker cable to the touchpad. 9. Connect the touchpad cable to the touchpad and close the latch to secure the cable. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. 43