Dell Alienware m15 R7 Service Manual - Page 61

Power button, Removing the power button

Get Dell Alienware m15 R7 PDF manuals and user guides View all Dell Alienware m15 R7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Steps 1. Connect the USB board to the system-board assembly. 2. Align the screw holes on the USB board to the screw holes on the system-board assembly. 3. Replace the three screws (M2x4) that secure the USB board to the system-board assembly. 4. Turn the system-board assembly over. Next steps 1. Follow the procedure from step 6 to step 25 in Installing the system board. 2. Install the battery. 3. Install the rear-I/O cover. 4. Install the wireless card. 5. Install the 2230 solid-state drive or 2280 solid-state drive in slot one, whichever applicable. 6. Install the 2230 solid-state drive or 2280 solid-state drive in slot two, whichever applicable. 7. Install the base cover. 8. Follow the procedure in After working inside your computer. Power button Removing the power button Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive or 2280 solid-state drive in slot one, whichever applicable. 4. Remove the 2230 solid state drive or 2280 solid-state drive in slot two, whichever applicable. 5. Remove the wireless card. 6. Remove the rear-I/O cover. 7. Remove the battery. 8. Follow the procedure from step 1 to step 21 in Removing the system board. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Steps
1.
Connect the USB board to the system-board assembly.
2.
Align the screw holes on the USB board to the screw holes on the system-board assembly.
3.
Replace the three screws (M2x4) that secure the USB board to the system-board assembly.
4.
Turn the system-board assembly over.
Next steps
1.
Follow the procedure from step 6 to step 25 in
Installing the system board
.
2.
Install the
battery
.
3.
Install the
rear-I/O cover
.
4.
Install the
wireless card
.
5.
Install the
2230 solid-state drive
or
2280 solid-state drive
in slot one, whichever applicable.
6.
Install the
2230 solid-state drive
or
2280 solid-state drive
in slot two, whichever applicable.
7.
Install the
base cover
.
8.
Follow the procedure in
After working inside your computer
.
Power button
Removing the power button
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
2230 solid-state drive
or
2280 solid-state drive
in slot one, whichever applicable.
4.
Remove the
2230 solid state drive
or
2280 solid-state drive
in slot two, whichever applicable.
5.
Remove the
wireless card
.
6.
Remove the
rear-I/O cover
.
7.
Remove the
battery
.
8.
Follow the procedure from step 1 to step 21 in
Removing the system board
.
61