Dell Dimension 4400 Dell Dimension 4400 Systems Owner's Manual - Page 63
Reattaching the Hinge Arms
View all Dell Dimension 4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Reattaching the Hinge Arms CAUTION: Before you begin any of the procedures in this section, follow the safety instructions listed in "When Working Inside Your Computer" on page 12. 1 Shut down the computer (see page 20). 2 Disconnect the power cable from your computer. 3 Remove the front door, if it is attached. The front door snaps off of the two hinge arms. 4 Remove the front-panel insert above the front-door bay area. Pull the bottom of the insert with your fingers to remove it. front-panel insert use fingers to pull here Adding Parts 63
Adding Parts
63
Reattaching the Hinge Arms
CAUTION:
Before you begin any of the procedures in this section,
follow the safety instructions listed in "When Working Inside Your
Computer" on page 12.
1
Shut down the computer (see page 20).
2
Disconnect the power cable from your computer.
3
Remove the front door, if it is attached.
The front door snaps off of the two hinge arms.
4
Remove the front-panel insert above the front-door bay area.
Pull the bottom of the insert with your fingers to remove it.
front-panel
insert
use fingers
to pull here