Dell Dimension 4400 Dell Dimension 4400 Systems Owner's Manual - Page 73
card-slot opening.
View all Dell Dimension 4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
7 To remove the card, grasp the card by the top corners and lift it out. If the card is difficult to remove, gently ease the card back and forth to remove it from the connector. card securing lever slot connector system board HINT: The AGP card is removed from the following illustration to provide a better view of the inside of your computer. filler bracket in empty card-slot opening back of computer 8 If you are not replacing the card, install a filler bracket in the empty card-slot opening. If you are adding a card, see page 69. 9 Lower the securing lever. 10 Close the computer cover (see page 87). 11 Connect your computer and devices to their electrical outlets, and turn them on. NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer. HINT: Installing filler brackets over empty cardslot openings is necessary to maintain Federal Communications Commission (FCC) certification of the computer. The brackets also keep dust and dirt out of your computer. Adding Parts 73