Dell Dimension 4400 Dell Dimension 4400 Systems Owner's Manual - Page 69
Disconnect the computer power cable from the wall outlet, and then - video card
View all Dell Dimension 4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions listed in "When Working Inside Your Computer" on page 12. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. The computer's card connectors allow you to install different types of devices such as modems, network adapters, and video cards. 1 Shut down the computer (see page 20). 2 Turn off any attached devices and disconnect them from their electrical outlets. NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack. 3 Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board. 4 Open the computer cover (see page 65). 5 To raise the securing lever, press the tab until it is free from the latch and then lift the lever. Adding Parts 69