Dell Dimension 4400 Dell Dimension 4400 Systems Owner's Manual - Page 65
Turn off any attached devices and disconnect them from their
View all Dell Dimension 4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
8 After the hinge arms clip into place, lower and raise the arms two or three times to properly seat them. 9 Reattach the front-panel insert. 10 Reconnect the power cable to your computer. 11 Reattach the front door as described on page 62. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions listed in "When Working Inside Your Computer" on page 12. 1 Shut down the computer (see page 20). 2 Turn off any attached devices and disconnect them from their electrical outlets. NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack. 3 Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board. Adding Parts 65