Dell Dimension 4500S Dell Dimension 4500S Owner's Manual - Page 69
Replace the card cage
View all Dell Dimension 4500S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards. 10 Insert the card into the card connector. If the card is full-length, insert the end of the card into the card guide bracket as you lower the card toward its connector on the system board. Insert the card firmly into the card connector on the riser board. 11 Lower the retention arm and press it into place, securing the card(s) in the computer. 12 Replace the card cage: a Align the tabs in the side of the card cage with the slots on the side of the computer, and slide the card cage down into place. b Make sure that the riser board is fully seated in the connector on the system board. card cage tabs (2) slots (2) Adding Parts 69